Over-Spray happens more often then most people realize. If you run your hand over your vehicle surface (paint , windshield ) and it feels bumpy and you see small color specks . that did not come off when you washed your car . it's most likely has been overspray .
Industrial paint over spray occurs when paint particles are carried through the air and land on surrounding properties in the area. Our cleaning and removal techniques are based on the type of finish and contaminants involved. Our methods don't void any manufacturer warranties.
We can remove the following oversprayed materials:
Industrial Protective Coatings
-Paint (Oil Based, Urethane, and Epoxies)
-Post Combustion Waste
How much does this cost ?
Our Prices are determined upon the quantity and size of vehicle, the severity of the over spray and what type of paint or emission was over sprayed on the vehicle. This is a variable cost and is usually negotiated with the insurance company or contractor handling your claim.
To better serve you, Keep It Klean can work with most insurance company. Please contact us for your next claim.
The Cleaning Process
|Pre Cleaning Inspection -
Examine the vehicle with the owner for any pre-existing scratches, dings, rock chips, burns, swirl marks, chipped glass etc.
- This stage removes all surface dirt and provides a protective barrier for removal of foreign material.
|Contaminant Removal Process -
A specially designed product is used so as to preserve the integrity of a vehicle's surface while gently removing the paint dots or other substances from the vehicle. This process is crucial in all cases in removing foreign materials from the vehicle with NO PAINT LOSS. Unlike compounds or sanding it does not affect the painted surfaces, including clear coats.
|Polish - This stage requires hand rubbing the surfaces of the vehicle with a mild cleaning polish. During this process any residual substances not removed with the contaminant removal process with be removed from your vehicles painted surfaces, glass, trim and chrome. Vinyl and convertible tops are carefully scrubbed. All residue is removed.
|Wax or Reseal -
This is the finishing stage. We will use a factory specified polymer based paint sealant to finish your vehicle.
- On completion of the vehicle, we will take the claimant around for re-inspection of the vehicle, at which time the owner will be asked to sign a release.
No. Our processes have been found safe by most major automotive manufacturers and have been proven to be clear coat safe. Over spray usually sits on top of the clear coat.
We do guarantee that the process we use will not harm your finish. We cannot guarantee your paint job, because we did not paint your paint vehicle , but we do stand behind our work.
Depending on the size and color of the vehicle and the severity of the overspray, a 2 man crew will average approximately 2-4 hours per vehicle. The lead on site will be able to confirm the estimated completion time when you drop off the vehicle.
After removing the over spray from your vehicle, We will polish your vehicle, and then apply a polymer sealant to the vehicle.
We use a non abrasive system on all glass surfaces to remove the over spray. This is the safest and most thorough way to clean the glass